How much does it cost to repair E1 water heater at home?

作者:樊仲鲲 | 发布日期:2024-09-20 11:23:53

本文目录一览一、How much does it cost to repair a Wanhe gas water heater e1 failure?
200 yuan.
Wanhe water heater maintenance fee standards are calculated as follows. You should first check whether the water heater has expired the warranty period. If the warranty period has expired, the cost of on-site repair will be 50-100 yuan, based on the degree of damage to your water heater. The maintenance cost of a water heater that is free of charge before the warranty period is about 60 yuan
1. The solenoid valve is damaged or aged. The solenoid valve is aged and will be out of control. When the ignition starts, it can be sucked in and start a fire. , but then closed and turned off.
2. The gas pre ssure is too high or too low. Water heaters using cylinder gas will have the output pre ssure of the cylinder pre ssure reducing valve being too high or too low. The water heater cannot start a fire.
二、aoSmith water heater E1 failure repair fee
Smith water heater E1 failure solution:
1. Replace the pre ssure membrane.
2. Clear the exhaust pipe.
3. Change the positions of the ignition needle and sensor needle.
Replace the pulser. 4. Reconnect the ground wire firmly.
5. Replace the pulser.
6. Replace the pulser.
7. Check whether the power indicator light is on, and first eliminate the problem of the power supply part.
8. Check whether the filter is clogged, then disassemble the panel and clean the filter with water or detergent.
9. Push the water-gas linkage valve to the micro switch to turn on the ignition. At this time, you can see the gas range hood with an external igniter. If you can see sparks, it means that the ignition device of the gas water heater is normal. Further inspection is required before ignition can be restored.

三、Why does the Macro water heater display E1 failure? How to repair
The fault of water heater E1 is that the ignition fails or stalls halfway. It is recommended to replace the main board or contact after-sales service.

The fault of Macro water heater E1 is that the ignition fails or stalls halfway, that is, it cannot start the fire.

The main reason is that there is a problem with the ignition system.

Generally, igniters are more likely to be broken.

The second is that there is a problem with the water heater mainboard.

Handling opinions:

After-sales personnel need to come to replace it.

The price of igniters is generally between 150-320, depending on the model. The price of motherboards is generally between 300-450, depending on the model.

,

Extended information:

If we are tired, we first need to find out what makes us feel tired. If it is because the job itself is not what you like, and there is not much meaning in persisting, then change to a job you like. Although it is said that you love what you do, but more often than not, loving what you do makes you more energetic and makes you enjoy and relax more.

Disproportionate negative impact. It's actually very simple. Talk to your boss about your ideas, and you may be able to get a good solution.

It would be the best thing if you can develop some hobbies. For example, playing ball, swimming, playing coffee, traveling, etc. These hobbies can very well transfer various negative impacts caused by life or work. Hobbies are a great way to reduce stress.